Website
Full Catalog
Applications

	SilverDust D2 IGB (QCI-D2-IGB) The SilverDust IGB servo motor controller is the top of our line. With its 16 24V I/O (the most of any of our controllers), the IGB is more than capable of doing the job of small PLC as well as a servo motor controller. For multi-axis applications, take advantage of the standard CANopen® port for sharing I/O and registers between controllers. 3.5A Continuous/4.5A Peak 16 5-24V, Isolated I/O 7 TTL Inputs or Outputs 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option Encoder Output CANopen® Voltage Clamp And Resister Drive Enable DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder
	SilverDust D2 IG8 (QCI-D2-IG8) The SilverDust IG8 servo motor controller is designed to maximize panel space. Its edge mounted design allows many controllers to stack on a single DIN rail. With 8 24V I/O (expandable to 15), the IG8 can easily handle most single axis applications. Using the standard CANopen® bus, multiple IG8 controllers can share their I/O and registers with each other creating a peer-to-peer network, or with a single “master” to create a master/slave network. 3.5A Continuous/4.5A Peak 8 5-24V, Isolated I/O 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option Encoder Output CANopen® Ethernet Option Modbus TCP Option SSI Encoder Input Option Voltage Clamp And Resister Drive Enable DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder
	SilverDust D2 IGK (QCI-D2-IGK) The SilverDust IGK servo motor controller is designed to be a simple “slave” axis in a CANopen® master/slave network requiring only power, comm. and CANopen to be wired. This cost effect controller can be programmed to simply respond to move commands from the CANopen bus. If only a few I/O are required, the standard 7 TTL I/O can be converted to 24V I/O using a 24V breakout (QCI-BO-B52) on the SMI port. 3.5A Continuous/4.5A Peak 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option CANopen® Voltage Clamp And Resister DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder
	SilverDust D2 IGF (QCI-D2-IGF) The SilverDust IGF servo motor controller is our simplest, most cost effective closed frame controller. With only serial comm (RS-232/RS-485), power, and 7 TTL I/O; the IGF is an inexpensive way to add servo control to a serial device such as a PC, PLC or HMI. With ASCII, binary, and Modbus® protocols, serial communications is a snap. If only a few 24V I/O are required, the standard 7 TTL I/O can be converted to 24V I/O using a 24V breakout (QCI-BO-B52) on the SMI port. 3.5A Continuous/4.5A Peak 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option Voltage Clamp And Resister DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder

	SilverDust D2 IG (QCI-D2-IG) The SilverDust IG servo motor controller’s open frame design reduces it cost and size to fit those applications where an electronics enclosure is being used (ideal for OEMs). 3.5A Continuous/4.5A Peak 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option Encoder Output Voltage Clamp And Resister DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder
	SilverDust D2 IG-01 (QCI-D2-IG-01) The IG-01 is a board only version of IG (see above) designed to allow OEMs to mount the board in their own enclosures to minimize space used. Like all the SilverDust controllers, the IG comes standard with an SMI port for power, comm., and 7 TTL I/O. QuickSilver supplies many breakouts for the SMI port, including the QCI-BO-B52 that converts the 7 TTL I/O to 24V and the QCI-BO-B1A that converts I/O #2 to an analog output. 3.5A Continuous/4.5A Peak 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option Encoder Output Voltage Clamp And Resister DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder
	SilverDust D2 MG (QCI-D2-MG) The SilverDust MG is our smallest servo controller. Its open frame design and motor winding breakout is ideal for OEMs driving a 3rd party motor in either open loop (no encoder) or closed loop. Like all the SilverDust controllers, the IG comes standard with an SMI port for power, comm., and 7 TTL I/O. QuickSilver supplies many breakouts for the SMI port, including the QCI-BO-B52 that converts the 7 TTL I/O to 24V and the QCI-BO-B1A that converts I/O #2 to an analog output. 3.5A Continuous/4.5A Peak 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option CANopen® OptionD DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder
	SilverDust D2 MG-01 (QCI-D2-MG-01) The MG-01 is a board only version of MG (see above) designed to allow OEMs to mount the board in their own enclosures to minimize space used.   3.5A Continuous/4.5A Peak 7 TTL Inputs or Outputs (use QCI-BO-B52 for 24V I/O) 4 Analog Inputs (Joystick) Analog Output Option (use QCI-BO-B1A) RS-232 or RS-485 ASCII, Binary, Modbus®, DMX Option CANopen® Option DB15HD (pin): SMI Port DB15HD (socket): Motor I/F including motor power and encoder

	SilverNugget N3 (QCI-N3-E3-EE-04) For NEMA 34 Frame motors, the SilverNugget N3 provides up to 20A peak and 10A continuous. The N3 will drive QuickSilver's 34 frame motors with separate winding connectors. 7 TTL Inputs or Outputs 4 Analog Inputs (Joystick) RS-232 or RS-485 ASCII, Binary, Modbus Option DB15HD (pin): SMI Port (use QCI-BO-B3 to breakout) DB3 (pin): Power Port DB15HD (socket): motor I/F (encoder) DB5 (socket): motor I/F (motor Windings) Add 24V I/O using QCI-OPTMC-24.
	Servo Motors  QuickSilver Controls offers NEMA 11, NEMA 17, NEMA 23, and NEMA 34 frame servo motors with encoders. NEMA 17 and 23 frame motor require only a single cable for both motor and encoder signals which reduces cost and makes installation much simpler.  Most motors are offered with an optional wash down (IP65) rating.  Motor/Encoder Key Features NEMA 11 Frame 4000 Counts/Rev Up To 50 oz-in IP50 or IP65 Datasheet QCI-DS017  NEMA 17 Frame  8000 Counts/Rev Up To 50 oz-in IP50 or IP65 Datasheet QCI-DS007  NEMA 23 Frame  8000 Counts/Rev Up To 380 oz-in IP50 or IP65 Datasheet QCI-DS008   NEMA 34 Frame  For use with SilverNugget N3 Controller/Driver 16000 Counts/Rev Up To 3200 oz-in IP50 or IP65 Datasheet QCI-DS009